DMC Part Numbering System

DMC Part Number System

DMC Part Number System
(Example: C10-218xx)

C10218XX
Components
C = Kit (Cable & Ferrule)
A = Assemblies (Cable Only)
F = Ferrules Only
MATERIAL
08 = INCONEL 625
09 = INCONEL 600
10 = 321 CRES
CABLE DIAMETER
1 = .022 / .026
2 = .032 / .038
3 = .040 / .046
9 = .062 / .072
LENGTH
9 = 9″
12 = 12″
15 = 15″
18 = 18″
21 = 21″
24 = 24″
SPECIAL
CONFIGURATION*
XX = Special*
PKG = One Part No. For Each 50 Piece Package

*SPECIAL CONFIGURATION – Logo Stamp, Self-Looping Cable, etc. may require more than two characters. Consult DMC for details.

SAE Part Number System

SAE Part Number System
(Example: AS3510-0218K)

AS35100218K
MATERIAL*
AS3509 = INCONEL 600
AS3510 = 321 CRES
AS3511 = 304 CRES (Consult DMC)
AS3655 = INCONEL 625
CABLE DIAMETER
01 = .022 / .026
02 = .032 / .038
03 = .040 / .046
04 = .062 / .072
LENGTH
9 = 9″
12 = 12″
15 = 15″
18 = 18″
21 = 21″
24 = 24″
CONFIGURATION
K = Kit (Cable & Ferrule)
C = Cable Assembly (Cable Only)
F = Ferrule (FerrulesOnly)

*Other SAE Part Numbers – AS3618, AS3619 (Elongated Ferrules).

COLOR CODE

Standard packaging defines size by a standard DMC color code to avoid mixing ferrules and cable:
.022 Red/Pink.032 Blue.040 Yellow.062 Green

 

Cable Length Options:

9″, 12″, 15″, 18″, 21″ & 24″ (Dimensions are in Inches).

Note:   18 inch Length is the Most Common Length Specified.

Important Information:
When considering the cable length, be sure to add the extra cable required to engage the tension mechanism in the application tool: Add 8 inches for a tool with a 3 inch nose, and 12 inches for a tool with a 7 inch nose.

 

Material Options:

MaterialsUsed in
AS3655 = AMS (INCONEL 625)high corrosion applications
AS3509 = AMS5687 (INCONEL 600)high temperature and non-magnetic required environments
AS3510 = AMS5689 (321 CRES)
CRES = Corrosion Resistant Stainless SteelNote:  321 CRES is considered to be Standard in the Aerospace Industry
non-extreme conditions.

NOTE: Safety Cable material selection is the user’s responsibility. It should be done with consideration to the environment where the Safety Cable is used.

Safety Cable KITS*

All Products On This Page Supplied 50 Pieces Per Package

MATERIAL / PART NUMBER**DIAMETER
(Inches)
LENGTH
(See Note)
321 CRESINCONEL 625INCONEL 600
C10-312C08-312NC09-312.04012″
C10-318C08-318NC09-318.04018″
C10-321C89-321NC09-321.04021″
C10-324C08-324NC09-324.04024″
C10-212C08-212NC09-212.03212″
C10-218C08-218NC09-218.03218″
C10-221C08-221NC09-221.03221″
C10-224C08-224NC09-224.03224″
C10-112C08-112NC09-112.02212″
C10-118C08-118NC09-118.02218″
C10-121C08-121NC09-121.02221″
C10-124C08-124NC09-124.02224″
Note:  When considering the cable length, be sure to add the extra cable required to engage the tension mechanism in the application tool:  Add 6 – 8 inches for a tool with a 3 inch nose and 10 – 12 inches for a tool with a 7 inch nose.

 

*Kit Part Number applies to one cable ­assembly and one ferrule. Minimum order is 50 pieces.
**Order in multiples of 50 or add “PKG” to Part Number (shown in chart) when ordering a 50 piece bag of Safety Cable.

 

Safety Cable ASSEMBLIES*

All Products On This Page Supplied 50 Pieces Per Package

 

MATERIAL / PART NUMBER**DIAMETER
(Inches)
LENGTH
(See Note)
321 CRESINCONEL 625INCONEL 600
A10-312A08-312NA09-312.04012″
A10-318A08-318NA09-318.04018″
A10-321A08-321NA09-321.04021″
A10-324A08-324NA09-324.04024″
A10-212A08-212NA09-212.03212″
A10-218A08-218NA09-218.03218″
A10-221A08-221NA09-221.03221″
A10-224A08-224NA09-224.03224″
A10-112A08-112NA09-112.02212″
A10-118A08-118NA09-118.02218″
A10-121A08-121NA09-121.02221″
A10-124A08-124NA09-124.02224″
Note:  When considering the cable length, be sure to add the extra cable required to engage the tension mechanism in the application tool:  Add 6 – 8 inches for a tool with a 3 inch nose and 10 – 12 inches for a tool with a 7 inch nose.

 

*Assembly Part Number applies to one cable with end fitting attached. Minimum order is 50 pieces.

**Order in multiples of 50 or add “PKG” to Part Number (shown in chart) when ordering a 50 piece bag of Safety Cable 

 

Safety Cable FERRULES

All Products On This Page Supplied 50 Pieces Per Package

CABLE
DIAMETER
STANDARD FERRULES**
321 CRESINCONEL 625INCONEL 600LENGTHDIAMETER
.022F10-1F08-1NF09-1.095 max.090
.032F10-2F08-2NF09-2.164 max.105
.040F10-3F08-3NF09-3.164 max.105
ELONGATED FERRULES**
.022***F10-08***F08-08N***F09-08***.185 max.090
.032F10-04F08-04NF09-04.325 max.105
.040F10-07F08-07NF09-07.325 max.105
For more information on Elongated Ferrules, click here.

 

* FerrulePart Number applies to one cable with end fitting attached. Minimum order is 50 pieces.
** Order in multiples of 50 or add “PKG” to Part Number (shown in chart) when ordering a 50 piece cartridge of Safety Cable Ferrules.
*** .022 elongated Ferrules are currently supplied in loose piece packaging (not in a cartridge).

 

Scroll to Top